PRODUCTS / HOT ROLLED STEEL
HRC steel pipes & profiles.
A practical range of hot rolled steel tubing for fabrication, frames, gates and general steelwork. Choose round, square, rectangular, L, D or T profiles to suit your drawing.

MATERIAL & USE
Built around your specification.
HRC pipe (Hot Rolled Coil pipe), often called HR pipe, is an MS pipe formed from hot-rolled steel strip. As-rolled material commonly has a darker surface with mill scale; pickled or other finishes can differ. It is commonly used for frames and general fabrication. Confirm the grade, finished tube tolerances and current price for your order.
NAS Pipe supplies HRC pipes to customers. Tell us how the pipe will be used, particularly when your order must match an existing frame, drawing or specified grade.
For gate frames, grills, workshop assemblies or other fabrication, send the section specified by your fabricator. Include outside dimensions, wall thickness, length and quantity. Compare our sizes and gauges reference, or use the enquiry checklist for a current quotation from our Lahore sales team.
At a glance
- Round, square and rectangular hollow sections
- L, D and T special profiles on enquiry
- Standard pipe length: 20 feet
- Large sections and heavier walls: request availability
HRC & CRC
Key differences at a glance.
| Feature | HRC pipe | CRC pipe |
|---|---|---|
| Material process | Formed directly from hot rolled steel strip | Hot rolled steel that is further cold processed |
| Surface | Blue-grey finish with visible mill scale | Smoother, cleaner surface finish |
| Dimensional control | Confirm finished tube dimensions and tolerances | Confirm finished tube dimensions and tolerances |
| Typical uses | Structural frames, construction, agriculture and general fabrication | Furniture, bending applications, automotive components and light fabrication |
| Cost | Usually the more economical option | Generally costs more because of additional processing |
SIZE SELECTION
Common HRC sizes.
Dimensions below are in inches. These are selected catalogue sizes; confirm the required size and wall thickness together before ordering.
| Profile | Listed sizes |
|---|---|
| Round | ½,⅝,¾,1,1¼,1½,1⅝,1⅞,2¼,2⅞,3,4,6,8,10,12, |
| Square | ⅜ × ⅜,½ × ½,⅝ × ⅝,¾ × ¾,1 × 1,1¼ × 1¼,1½ × 1½,2 × 2,6 × 6,8 × 8, |
| Rectangular | ⅜ × ¾,½ × 1,½ × 1½,½ × 2,¾ × 1½,1 × 1½,1 × 2,1¼ × 1¾,1¼ × 2½,1 × 3,1½ × 2,1½ × 3,1½ × 4,2 × 4,2 × 5,2 × 6,4 × 6, |
| Special profiles | L, D and T sections. Send a sketch with dimensions. |
Choosing from the HRC Pipe Selection.
Round
Used in fabrication and tubular assemblies. State whether your dimension is an outside diameter or a nominal pipe size.
Square & rectangular
Flat faces suit frames, brackets and joined assemblies. Include both outside dimensions and the wall thickness.
Special profiles
L, D and T profiles need a section drawing or a sample reference to establish the correct shape and dimensions.
For load-bearing work, provide the material grade and section specified by your project designer. Suitability depends on the full design, not the profile name alone.
KNOW YOUR PROFILE
Many shapes.
Product photos are shown for identification. Actual dimensions, finish and special-profile geometry are confirmed with your quotation.

Round pipes
Circular sections for tubular frames and fabricated assemblies.

Square pipes
Equal-sided sections with flat faces for frame fabrication.

Rectangular pipes
Unequal-sided sections for frames with different width and depth requirements.

L profiles
Shaped sections; send both leg dimensions and a section drawing.

D profiles
A flat face with a curved side; confirm the exact section dimensions.

T profiles
Shaped sections with a crossbar and stem; drawing confirmation required.
