PRODUCTS / COLD ROLLED STEEL
CRC steel pipes & profiles.
Cold rolled tubing for furniture, shop displays, fixtures and fabricated products. Compare the section size and wall thickness, then send your requirements for a current quotation.

SURFACE & FIT
For work where the details show.
CRC pipe (Cold Rolled Coil pipe), often called CR pipe, is MS tubing made from cold-rolled steel strip. Cold rolling generally improves the strip surface finish and thickness control. Furniture and light-fabrication suitability still depends on the steel grade, wall thickness, weld quality and finishing process. Confirm finished tube dimensions and tolerances with your quotation.
Round, square and rectangular sections support a wide range of furniture and frame designs.
If your process involves tight bending, plating or a particular paint finish, tell us before ordering so the material requirement can be checked.
Planning table bases, chair frames, charpai or shop displays? Ask our Lahore sales team about CRC pipe options for your design. Send the outside dimensions, wall thickness, number of lengths and destination. Check the size and thickness catalogue before preparing your material list.
Order by size and thickness.
For example: 1 × 1 inch square, 18G (1.2 mm), 20-foot length.
Include the number of lengths and destination city. Availability varies by size and wall thickness.
Read the buying guide →HRC & CRC
Key differences at a glance.
| Feature | HRC pipe | CRC pipe |
|---|---|---|
| Material process | Formed directly from hot rolled steel strip | Hot rolled steel that is further cold processed |
| Surface | Blue-grey finish with visible mill scale | Smoother, cleaner surface finish |
| Dimensional control | Confirm finished tube dimensions and tolerances | Confirm finished tube dimensions and tolerances |
| Typical uses | Structural frames, construction, agriculture and general fabrication | Furniture, bending applications, automotive components and light fabrication |
| Cost | Usually the more economical option | Generally costs more because of additional processing |
THICKNESS OPTIONS
Gauge and millimetres, together.
These paired values follow our CRC supply list. Not every thickness is listed for every size.
Gauge labels vary between suppliers. Use the stated millimetre thickness when comparing quotations and confirming your order.
CRC profile range.
| Profile | Selected listed sizes in inches |
|---|---|
| Round | ½,⅝,¾,1,1¼,1½,1⅝,1¾,2,2¼,2½,2⅞,3½,4, |
| Square | ⅜ × ⅜ through 4 × 4, in selected sizes |
| Rectangular | ⅜ × ¾,½ × 1,½ × 1½,½ × 2,¾ × 1½,1 × 1½,1 × 2,1¼ × 1¾,1¼ × 2½,1½ × 2,1 × 3,1½ × 3,1½ × 4,2 × 4, |
Supply details.
Standard length
20-foot pipe lengths. Tell us if your order requires a different length arrangement.
Finish requirements
Share the intended finish or fabrication process when requesting your quote. Final suitability depends on the material and process.
KNOW YOUR PROFILE
Many shapes.
Product photos are shown for identification. Actual dimensions and finish are confirmed with your quotation.



